Are you looking for a heating system to increase energy efficiency for heating, cooling and hot water preparation? Our new aroTHERM Split plus convinces with an increased energy efficiency value ETAs of 203% thus achieving A+++* ErP label for all models. The COP value of >3.6 for domestic hot water preparation is the best in its class and ensures low operating costs.

With an output range of 3 to 7 kW and lowest operation noise of 30 dB(A) in 3m distance this heat pump is the ideal allrounder: suiting new builds just as well as sufficiently insulated existing buildings – especially in areas with dense development.

When it comes to choosing the installation location, it also impresses with its high level of flexibility: the indoor and outdoor units can be installed up to 40 metres away from each other.

The effectiveness of a heat pump is significantly influenced by its refrigerant. It is the transport medium for the heat and is therefore particularly important. The refrigerant R410A is the standard in many heat pumps. From January 2025, however, new regulations will make it illegal to use in heat pumps with a refrigerant content of less than 3kg.

The ideal solution: R32 is a modern refrigerant for small and medium-sized split heat pumps such as the aroTHERM Split plus. It is characterised by a significantly lower global warming potential (GWP) and higher efficiency.

The aroTHERM Split plus heat pump consists of an outdoor and an indoor unit. By reducing the heating time by up to 35% you enjoy faster hot water comfort.

The uniTOWER Split plus is no bigger than a fridge, but covers the needs of a four-person family due to the integrated storage tank. If you need more hot water or want to integrate a solar thermal system, you have several options: Choose a wall-mounted hydraulic station in combination with a cylinder such as the uniSTOR.

*Energy efficiency class for room heating at 35°C

**Efficiency increase of 3/5/7 kW models for DHW and room heating at 35°